Catégories



Une archéologie du goût. Céramique et consommation (Moyen Age-Temps modernes). / Danièle Alexandre-Bidon (2005)
Titre : Une archéologie du goût. Céramique et consommation (Moyen Age-Temps modernes). Type de document : texte imprimé Auteurs : Danièle Alexandre-Bidon Editeur : PARIS : Editions A. & J. Picard Année de publication : 2005 Collection : Espaces médiévaux Importance : 301 p. ISBN/ISSN/EAN : 978-2-7084-0740-4 Prix : 50,05 Note générale : Annexes
Bibliographie
Illustrations
IndexLangues : Français (fre) Catégories : Thésaurus Agro-alimentaire
HISTOIRE ; CUISINE ; BOIS ; METAL ; VERRE ; CERAMIQUE ; GOUT ; GASTRONOMIE ; ARGILE
Liste Plan de classement
5.11 (ANTHROPOLOGIE DE L'ALIMENTATION) [Classement Massy]Type de document : Livre Permalien de la notice : https://infodoc.agroparistech.fr/index.php?lvl=notice_display&id=67725 Une archéologie du goût. Céramique et consommation (Moyen Age-Temps modernes). [texte imprimé] / Danièle Alexandre-Bidon . - PARIS : Editions A. & J. Picard, 2005 . - 301 p.. - (Espaces médiévaux) .
ISBN : 978-2-7084-0740-4 : 50,05
Annexes
Bibliographie
Illustrations
Index
Langues : Français (fre)
Catégories : Thésaurus Agro-alimentaire
HISTOIRE ; CUISINE ; BOIS ; METAL ; VERRE ; CERAMIQUE ; GOUT ; GASTRONOMIE ; ARGILE
Liste Plan de classement
5.11 (ANTHROPOLOGIE DE L'ALIMENTATION) [Classement Massy]Type de document : Livre Permalien de la notice : https://infodoc.agroparistech.fr/index.php?lvl=notice_display&id=67725 Réservation
Réserver ce documentExemplaires
Localisation Emplacement Section Cote Support Code-barres Disponibilité Massy Bibliothèque ALIMENTATION-NUTRITION ALE 5.11 Papier 33004000493950 Empruntable Caractérisation expérimentale des matériaux, 1. Propriétés physiques, thermiques et mécaniques (2007)
Titre de série : Caractérisation expérimentale des matériaux, 1 Titre : Propriétés physiques, thermiques et mécaniques Type de document : texte imprimé Auteurs : Suzanne Degallaix-Moreuil (1947-....), Directeur ; Bernhard Ilschner (1928-2006), Directeur Editeur : Lausanne : Presses polytechniques et universitaires romandes Année de publication : 2007 Collection : Traité des matériaux num. 2 Importance : 1 vol. (XIV-402 p.) Présentation : ill., couv. ill. Format : 25 cm ISBN/ISSN/EAN : 978-2-88074-567-7 Prix : 66 EUR Note générale : Bibliogr. Index. Langues : Français (fre) Catégories : Liste Plan de classement
12.6 (MECANIQUE DES MILIEUX CONTINUS-RESISTANCE DES MATERIAUX) [Classement Massy]
Thésaurus Agro-alimentaire
TECHNIQUE ANALYTIQUE ; PARAMETRE PHYSIQUE ; MICROSCOPIE ; CONDUCTIBILITE THERMIQUE ; RESISTANCE DES MATERIAUX ; DEFORMATION ; MECANIQUE ; TEMPERATURE ; POLYMERE ; RMN ; CERAMIQUE ; MATERIAU ; STRUCTURE ; ANALYSE D'IMAGE ; SPECTROSCOPIE INFRAROUGERésumé : L'utilisation de matériaux structuraux dans l'industrie nécessite une bonne connaissance de leurs propriétés d'usage, afin de répondre au mieux aux contraintes sévères imposées dans les principaux secteurs industriels modernes (énergie, construction aéronautique et automobile, etc.), tant en termes de qualité et de poids, que de sécurité et de coût.Cet ouvrage offre une vue aussi large que possible des principales méthodes expérimentales de caractérisations chimique, thermique et mécanique des matériaux utilisés pour la conception d'éléments de structure. Une attention particulière est portée sur l'étude des méthodes de caractérisation des matériaux métalliques, les cas des polymères et des céramiques étant plus spécifiquement traités dans les volumes 14 et 16 du Traité des Matériaux. Le lecteur trouvera dans ces pages les bases physiques et théoriques indispensables à une bonne compréhension de ces méthodes, ainsi qu'une présentation détaillée des moyens de mise en oeuvre des principales techniques d'analyse et de caractérisation employées dans les laboratoires de recherche et de développement. La mise en adéquation de la méthode choisie avec l'objectif visé (notamment en termes de précision, de complexité et de coût) est tout particulièrement soulignée. L'ouvrage se clôt par une présentation des techniques de contrôle non destructif des matériaux, nécessaires à la vérification de la qualité des matériaux ainsi que de la bonne tenue en service des structures. La rédaction de cet ouvrage pluridisciplinaire a fait intervenir de nombreux spécialistes des différentes techniques présentées. Type de document : Livre Table des matières : Analyse chimique des matériaux métalliques
Caractérisation des structures des matériaux par microscopie optique
L'analyse dimages appliquée à la caractérisation des matériaux
Densimétrie et dilatométrie
Conductibilité thermique
Caractérisation des matériaux en traction monotone
Caractérisation de la dureté des matériaux
Résistance des matériaux à la fatigue
Résistance des matériaux à l'amorçage et à la propagation des fissures
Résistance et ductilité à moyennes et hautes vitesses de déformation
Essais mécaniques à haute température
Caractérisation des polymères
Caractérisation mécanique des céramiques
Essais non destructifs
Index thématiquePermalien de la notice : https://infodoc.agroparistech.fr/index.php?lvl=notice_display&id=182845 Caractérisation expérimentale des matériaux, 1. Propriétés physiques, thermiques et mécaniques [texte imprimé] / Suzanne Degallaix-Moreuil (1947-....), Directeur ; Bernhard Ilschner (1928-2006), Directeur . - Lausanne : Presses polytechniques et universitaires romandes, 2007 . - 1 vol. (XIV-402 p.) : ill., couv. ill. ; 25 cm. - (Traité des matériaux; 2) .
ISBN : 978-2-88074-567-7 : 66 EUR
Bibliogr. Index.
Langues : Français (fre)
Catégories : Liste Plan de classement
12.6 (MECANIQUE DES MILIEUX CONTINUS-RESISTANCE DES MATERIAUX) [Classement Massy]
Thésaurus Agro-alimentaire
TECHNIQUE ANALYTIQUE ; PARAMETRE PHYSIQUE ; MICROSCOPIE ; CONDUCTIBILITE THERMIQUE ; RESISTANCE DES MATERIAUX ; DEFORMATION ; MECANIQUE ; TEMPERATURE ; POLYMERE ; RMN ; CERAMIQUE ; MATERIAU ; STRUCTURE ; ANALYSE D'IMAGE ; SPECTROSCOPIE INFRAROUGERésumé : L'utilisation de matériaux structuraux dans l'industrie nécessite une bonne connaissance de leurs propriétés d'usage, afin de répondre au mieux aux contraintes sévères imposées dans les principaux secteurs industriels modernes (énergie, construction aéronautique et automobile, etc.), tant en termes de qualité et de poids, que de sécurité et de coût.Cet ouvrage offre une vue aussi large que possible des principales méthodes expérimentales de caractérisations chimique, thermique et mécanique des matériaux utilisés pour la conception d'éléments de structure. Une attention particulière est portée sur l'étude des méthodes de caractérisation des matériaux métalliques, les cas des polymères et des céramiques étant plus spécifiquement traités dans les volumes 14 et 16 du Traité des Matériaux. Le lecteur trouvera dans ces pages les bases physiques et théoriques indispensables à une bonne compréhension de ces méthodes, ainsi qu'une présentation détaillée des moyens de mise en oeuvre des principales techniques d'analyse et de caractérisation employées dans les laboratoires de recherche et de développement. La mise en adéquation de la méthode choisie avec l'objectif visé (notamment en termes de précision, de complexité et de coût) est tout particulièrement soulignée. L'ouvrage se clôt par une présentation des techniques de contrôle non destructif des matériaux, nécessaires à la vérification de la qualité des matériaux ainsi que de la bonne tenue en service des structures. La rédaction de cet ouvrage pluridisciplinaire a fait intervenir de nombreux spécialistes des différentes techniques présentées. Type de document : Livre Table des matières : Analyse chimique des matériaux métalliques
Caractérisation des structures des matériaux par microscopie optique
L'analyse dimages appliquée à la caractérisation des matériaux
Densimétrie et dilatométrie
Conductibilité thermique
Caractérisation des matériaux en traction monotone
Caractérisation de la dureté des matériaux
Résistance des matériaux à la fatigue
Résistance des matériaux à l'amorçage et à la propagation des fissures
Résistance et ductilité à moyennes et hautes vitesses de déformation
Essais mécaniques à haute température
Caractérisation des polymères
Caractérisation mécanique des céramiques
Essais non destructifs
Index thématiquePermalien de la notice : https://infodoc.agroparistech.fr/index.php?lvl=notice_display&id=182845 Exemplaires
Localisation Emplacement Section Cote Support Code-barres Disponibilité Massy Qualité et sécurité microbiologique des aliments et des procédés SCIENCES PHYSIQUES DEG 12.6 Papier 33004001023269 Consultable sur place Conception hygiénique de matériel et nettoyage-désinfection : pour une meilleure sécurité en industrie agroalimentaire (2016)
Titre : Conception hygiénique de matériel et nettoyage-désinfection : pour une meilleure sécurité en industrie agroalimentaire Type de document : texte imprimé Auteurs : Marie-Noëlle Bellon-Fontaine, Coordinateur ; Thierry Bénézech, Coordinateur ; Karine Boutroux, Coordinateur ; Christophe Hermon, Coordinateur Editeur : Paris : Lavoisier-Tec & Doc Année de publication : 2016 Collection : Sciences et techniques agroalimentaires Importance : 1 vol. (XIV-210 p.) Présentation : ill., couv. ill. en coul. Format : 24 x 17 cm ISBN/ISSN/EAN : 978-2-7430-2083-5 Note générale : Bibliogr. Index Langues : Français (fre) Catégories : Thésaurus Agro-alimentaire
BIOFILM ; MICROORGANISME ; ELECTROLYSE ; POLYMERE ; ALUMINIUM ; EAU ; EQUIPEMENT ; HYGIENE ; DESINFECTION ; DESINFECTANT ; NETTOYAGE ; DETERGENT ; AGENT DE CONTAMINATION ; CONTAMINATION ; INDUSTRIE ALIMENTAIRE ; MATERIAU ; BOIS ; CAOUTCHOUC ; CERAMIQUE ; FIBRE TEXTILE ; MATIERE PLASTIQUE ; ELASTOMERE ; METAL ; ACIER ; IRRADIATION ULTRAVIOLETTE ; TRAITEMENT AUX ULTRASONS ; VAPEUR ; CONTROLE DE QUALITE ; REGLEMENTATION ; CERTIFICATION ; NORME
Liste Plan de classement
2.8 (HYGIENE-DESINFECTION) [Classement Massy]Résumé : Cet ouvrage de synthèse aborde l’ensemble des éléments exogènes pouvant interférer sur les conditions d’hygiène des aliments transformés. Il aide notamment à la compréhension, la qualification et la quantification des phénomènes de contamination (chimique, physique, microbiologique), d’adhésion microbienne et de formation de biofilms pouvant intervenir sur les machines et équipements des industries agroalimentaires.
Il propose et analyse les moyens à mettre en place pour éviter et éliminer les contaminations à travers :
• l’étude des matériaux constitutifs des machines et équipements alimentaires ;
• l’application de principes de conception hygiénique des outils et des environnements de production ;
• la mise en œuvre de différentes méthodes de nettoyage-désinfection.
Véritable guide pratique, cet ouvrage est le fruit de la collaboration d’experts dans le cadre du RMT (réseau mixte technologique) ACTIA CHLEAN (Conception hygiénique des lignes et amélioration de la nettoyabilité).Type de document : Livre Table des matières : Contexte réglementaire et analyse des contaminants
CHAPITRE 1
Aspects réglementaires et normatifs
1. Le contexte réglementaire
2. Référentiels privés et normes
CHAPITRE 2
Contamination chimique, physique et microbiologique
1. Contaminants chimiques
2. Contaminants physiques
3. Contaminants microbiologiques
4. Conclusion
CHAPITRE 3
Les matériaux dans l’adhésion microbienne et la formation de biofilms
1. De l’adhésion microbienne à la formation de biofilms ou comment s’organise la vie microbienne sur les surfaces
2. Influence des propriétés des surfaces en présence et du milieu environnant
3. La biocontamination des surfaces conduit à des effets indésirables
4. Comment prévenir la biocontamination côté matériau : quelques pistes à suivre
5. Conclusion
Matériaux constitutifs des machines et équipements alimentaires
CHAPITRE 4
Réglementation applicable aux matériaux au contact
1. Réglementation européenne et française
2. Principes généraux de la réglementation
3. Réglementation par classe de matériaux
4. Approche méthodologique de l’alimentarité
CHAPITRE 5
Les métaux
1. Les aciers inoxydables
2. L’aluminium et les alliages d’aluminium
3. La fonte
4. Les aciers non revêtus
5. Conclusion
CHAPITRE 6
Les polymères et matériaux associés
1. Les plastiques
2. Les peintures et vernis
3. Les élastomères
CHAPITRE 7
Autres matériaux
1. Bois et dérivés
2. Textiles
3. Bétons
4. Conclusion
Conception hygiénique des matériels et équipements alimentaires
CHAPITRE 8
Règles de conception hygiénique
1. Définition
2. Rappel synthétique sur les textes réglementaires, normatifs, les guides et ouvrages spécifiques de la conception hygiénique
3. Conception hygiénique et notions de dangers et risques associés
4. Principes généraux de la conception hygiénique des équipements des lignes de transformation
5. Prise en compte de la conception hygiénique dans la rédaction d’un cahier des charges
pour l’achat d’un équipement
6. Voies d’amélioration : quelques exemples de travaux de recherche récents
7. Conclusion
CHAPITRE 9
Méthodes de validation de la conception hygiénique
1. Applications des règles en lien avec l’usage du matériel
2. La certification
3. Méthodes d’évaluation de l’aptitude au nettoyage en place d’équipements pour les industries alimentaires
Nettoyage et désinfection
CHAPITRE 10
Le nettoyage et la désinfection « traditionnels »
1. Les souillures
2. Le nettoyage
3. La désinfection
4. Les détergents-désinfectants
5. L’eau
6. Les paramètres d’utilisation des produits de nettoyage et de désinfection
7. Les techniques d’application
8. Les processus
9. Les bonnes pratiques de sécurité
10. Conclusion
CHAPITRE 11
Les approches alternatives ou complémentaires aux méthodes traditionnelles de nettoyage
1. Pour le nettoyage
2. Pour le nettoyage et la désinfection
3. Pour la désinfection
4. Conclusion
CHAPITRE 12
Procédures de contrôle de l’hygiène des surfaces
1. Évaluation de l’hygiène des surfaces
2. Contrôle des opérations de désinfection – Analyses microbiologiques
3. Contrôle des opérations de nettoyage – Analyses biochimiques
4. Un cas particulier : la détection des allergènes sur les surfaces
5. Conclusion
IndexPermalien de la notice : https://infodoc.agroparistech.fr/index.php?lvl=notice_display&id=184746 Conception hygiénique de matériel et nettoyage-désinfection : pour une meilleure sécurité en industrie agroalimentaire [texte imprimé] / Marie-Noëlle Bellon-Fontaine, Coordinateur ; Thierry Bénézech, Coordinateur ; Karine Boutroux, Coordinateur ; Christophe Hermon, Coordinateur . - Paris : Lavoisier-Tec & Doc, 2016 . - 1 vol. (XIV-210 p.) : ill., couv. ill. en coul. ; 24 x 17 cm. - (Sciences et techniques agroalimentaires) .
ISBN : 978-2-7430-2083-5
Bibliogr. Index
Langues : Français (fre)
Catégories : Thésaurus Agro-alimentaire
BIOFILM ; MICROORGANISME ; ELECTROLYSE ; POLYMERE ; ALUMINIUM ; EAU ; EQUIPEMENT ; HYGIENE ; DESINFECTION ; DESINFECTANT ; NETTOYAGE ; DETERGENT ; AGENT DE CONTAMINATION ; CONTAMINATION ; INDUSTRIE ALIMENTAIRE ; MATERIAU ; BOIS ; CAOUTCHOUC ; CERAMIQUE ; FIBRE TEXTILE ; MATIERE PLASTIQUE ; ELASTOMERE ; METAL ; ACIER ; IRRADIATION ULTRAVIOLETTE ; TRAITEMENT AUX ULTRASONS ; VAPEUR ; CONTROLE DE QUALITE ; REGLEMENTATION ; CERTIFICATION ; NORME
Liste Plan de classement
2.8 (HYGIENE-DESINFECTION) [Classement Massy]Résumé : Cet ouvrage de synthèse aborde l’ensemble des éléments exogènes pouvant interférer sur les conditions d’hygiène des aliments transformés. Il aide notamment à la compréhension, la qualification et la quantification des phénomènes de contamination (chimique, physique, microbiologique), d’adhésion microbienne et de formation de biofilms pouvant intervenir sur les machines et équipements des industries agroalimentaires.
Il propose et analyse les moyens à mettre en place pour éviter et éliminer les contaminations à travers :
• l’étude des matériaux constitutifs des machines et équipements alimentaires ;
• l’application de principes de conception hygiénique des outils et des environnements de production ;
• la mise en œuvre de différentes méthodes de nettoyage-désinfection.
Véritable guide pratique, cet ouvrage est le fruit de la collaboration d’experts dans le cadre du RMT (réseau mixte technologique) ACTIA CHLEAN (Conception hygiénique des lignes et amélioration de la nettoyabilité).Type de document : Livre Table des matières : Contexte réglementaire et analyse des contaminants
CHAPITRE 1
Aspects réglementaires et normatifs
1. Le contexte réglementaire
2. Référentiels privés et normes
CHAPITRE 2
Contamination chimique, physique et microbiologique
1. Contaminants chimiques
2. Contaminants physiques
3. Contaminants microbiologiques
4. Conclusion
CHAPITRE 3
Les matériaux dans l’adhésion microbienne et la formation de biofilms
1. De l’adhésion microbienne à la formation de biofilms ou comment s’organise la vie microbienne sur les surfaces
2. Influence des propriétés des surfaces en présence et du milieu environnant
3. La biocontamination des surfaces conduit à des effets indésirables
4. Comment prévenir la biocontamination côté matériau : quelques pistes à suivre
5. Conclusion
Matériaux constitutifs des machines et équipements alimentaires
CHAPITRE 4
Réglementation applicable aux matériaux au contact
1. Réglementation européenne et française
2. Principes généraux de la réglementation
3. Réglementation par classe de matériaux
4. Approche méthodologique de l’alimentarité
CHAPITRE 5
Les métaux
1. Les aciers inoxydables
2. L’aluminium et les alliages d’aluminium
3. La fonte
4. Les aciers non revêtus
5. Conclusion
CHAPITRE 6
Les polymères et matériaux associés
1. Les plastiques
2. Les peintures et vernis
3. Les élastomères
CHAPITRE 7
Autres matériaux
1. Bois et dérivés
2. Textiles
3. Bétons
4. Conclusion
Conception hygiénique des matériels et équipements alimentaires
CHAPITRE 8
Règles de conception hygiénique
1. Définition
2. Rappel synthétique sur les textes réglementaires, normatifs, les guides et ouvrages spécifiques de la conception hygiénique
3. Conception hygiénique et notions de dangers et risques associés
4. Principes généraux de la conception hygiénique des équipements des lignes de transformation
5. Prise en compte de la conception hygiénique dans la rédaction d’un cahier des charges
pour l’achat d’un équipement
6. Voies d’amélioration : quelques exemples de travaux de recherche récents
7. Conclusion
CHAPITRE 9
Méthodes de validation de la conception hygiénique
1. Applications des règles en lien avec l’usage du matériel
2. La certification
3. Méthodes d’évaluation de l’aptitude au nettoyage en place d’équipements pour les industries alimentaires
Nettoyage et désinfection
CHAPITRE 10
Le nettoyage et la désinfection « traditionnels »
1. Les souillures
2. Le nettoyage
3. La désinfection
4. Les détergents-désinfectants
5. L’eau
6. Les paramètres d’utilisation des produits de nettoyage et de désinfection
7. Les techniques d’application
8. Les processus
9. Les bonnes pratiques de sécurité
10. Conclusion
CHAPITRE 11
Les approches alternatives ou complémentaires aux méthodes traditionnelles de nettoyage
1. Pour le nettoyage
2. Pour le nettoyage et la désinfection
3. Pour la désinfection
4. Conclusion
CHAPITRE 12
Procédures de contrôle de l’hygiène des surfaces
1. Évaluation de l’hygiène des surfaces
2. Contrôle des opérations de désinfection – Analyses microbiologiques
3. Contrôle des opérations de nettoyage – Analyses biochimiques
4. Un cas particulier : la détection des allergènes sur les surfaces
5. Conclusion
IndexPermalien de la notice : https://infodoc.agroparistech.fr/index.php?lvl=notice_display&id=184746 Réservation
Réserver ce documentExemplaires
Localisation Emplacement Section Cote Support Code-barres Disponibilité Massy Bibliothèque MICROBIOLOGIE-BIOTECHNOLOGIE BEL 2.8 Papier 33004000619109 Empruntable sous conditions Massy Qualité et sécurité microbiologique des aliments et des procédés MICROBIOLOGIE-BIOTECHNOLOGIE BEL 2.8 Papier 33004001023590 Consultable sur place Massy Bibliothèque MICROBIOLOGIE-BIOTECHNOLOGIE BEL 2.8 Papier 33004001023582 Empruntable Massy Qualité et sécurité microbiologique des aliments et des procédés MICROBIOLOGIE-BIOTECHNOLOGIE BEL 2.8 Papier 33004001023608 Consultable sur place Handbook of membrane separations. Chemical, pharmaceutical, food, and biotechnological applications. / Anil K. Pabby (2009)
Titre : Handbook of membrane separations. Chemical, pharmaceutical, food, and biotechnological applications. Type de document : texte imprimé Auteurs : Anil K. Pabby, Editeur scientifique ; Syed S.H. Rizvi, Editeur scientifique ; Ana Maria Sastre, Editeur scientifique Editeur : Boca Raton : CRC Press Année de publication : 2009 Importance : 1164 p. ISBN/ISSN/EAN : 978-0-8493-9549-9 Prix : 267,54 Note générale : Bibliographie
Illustrations
IndexLangues : Anglais (eng) Catégories : Liste Plan de classement
16.5 (SEPARATION-PURIFICATION-EXTRACTION) [Classement Massy]
Thésaurus Agro-alimentaire
SEPARATION ; MEMBRANE ; TRANSFERT DE MASSE ; CHROMATOGRAPHIE ; GAZ ; PERVAPORATION ; CERAMIQUE ; EXTRACTION PAR FLUIDE SUPERCRITIQUE ; ENCRASSEMENT ; ULTRAFILTRATION ; DISTILLATION ; BRASSERIE ; LAITERIE ; TRAITEMENT DES DECHETS INDUSTRIELS ; OSMOSE INVERSE ; BIOREACTEUR ; EXTRACTION PAR SOLVANTType de document : Livre Table des matières : SECTION I Membrane Applications in Chemical and Pharmaceutical Industries and in Conservation of Natural Resources
Chapter 1 Membrane Applications in Chemical and Pharmaceutical Industries and in Conservation of Natural Resources: Introduction
Chapter 2 Application of Membrane Contactors as Mass Transfer Devices
Chapter 3 Membrane Chromatography
Chapter 4 Membranes in Gas Separation
Chapter 5 Pervaporation: Theory, Practice, and Applications in the Chemical and Allied Industries
Chapter 6 Current Status and Prospects for Ceramic Membrane Applications
Chapter 7 Membrane Technologies and Supercritical Fluids: Recent Advances
Chapter 8 Techniques to Enhance Performance of Membrane Processes
Chapter 9 Separation and Removal of Hydrocarbons Using Polymer Membranes
Chapter 10 Zeolite Membranes: Synthesis, Characterization, Important Applications, and Recent Advances
Chapter 11 Membrane Fouling: Recent Strategies and Methodologies for Its Minimization
Chapter 12 Membrane Extraction in Preconcentration, Sampling, and Trace Analysis
Chapter 13 Hybrid Liquid Membrane Processes with Organic Water-Immiscible Carriers (OHLM): Application in Chemical and Biochemical Separations
Chapter 14 Advancements in Membrane Processes for Pharmaceutical Applications
Chapter 15 Membranes in Drug Delivery
Chapter 16 Bio-Responsive Hydrogel Membranes
SECTION Il Membrane Applications in Biotechnology, Food Processing, Life Sciences, and Energy Conversion
Chapter 17 Membrane Applications in Biotechnology, Food Processing, Life Sciences, and Energy Conversion: Introduction
Chapter 18 Ultrafiltration-Based Protein Bioseparation
Chapter 19 Membrane Distillation in Food Processing
Chapter 20 Applications of Membrane Separation in the Brewing Industry
Chapter 21 Developments of Bipolar Membrane Technology in Food and Bio-Industries
Chapter 22 Applications of Membrane Technology in the Dairy Industry
Chapter 23 Microporous Membrane Blood Oxygenators
Chapter 24 Transporting and Separating Molecules Using Tailored Nanotube Membranes
Chapter 25 Use of Emulsion Liquid Membrane Systems in Chemical and Biotechnological Separations
Chapter 26 Membrane Electroporation and Emerging Biomedical Applications
Chapter 27 Proton-Conducting Membranes for Fuel Cells
SECTION III Membrane Applications in Industrial Waste Management (lncluding Nuclear), Environmental Engineering, and Future Trends in Membrane Science
Chapter 28 Membrane Applications in Industrial Waste Management (Including Nuclear), Environmental
Engineering, and Future Trends in Membrane Science: Introduction
Chapter 29 Treatment of Radioactive Effluents: Introduction, Fundamentals, and Scope of Different Membrane Processes
Chapter 30 Radioactive Waste Processing: Advancement in Pressure-Driven Processes and Current World Scenario
Chapter 31 Liquid Membrane-Based Separations of Actinides
Chapter 32 Reverse Osmosis-Based Treatment of Radioactive Liquid Wastes Generated in Hospital Facility and in Steel Industry: Case Studies
Chapter 33 Evaluation of Membrane-Based Processing of Radioactive Nuclear Plant Waste: Case Studies
Chapter 34 Application of Donnan Membrane Process for Recovery of Coagulants from Water Treatment Residuals
Chapter 35 Utilization of Membrane Processes in Treating Various Effluents Generated in Pulp and Paper Industry
Chapter 36 Membrane Bioreactors for Wastewater Treatment
Chapter 37 Membrane-Assisted Solvent Extraction for the Recovery of Metallic Pollutants: Process Modeling and Optimization
Chapter 38 Membrane Contactors for Gaseous Streams Treatments
Chapter 39 Strip Dispersion Technique: Application for Strategic and Precious Metal Separation and Treatment of Wastewater Streams
Chapter 40 Electrically Enhanced Membrane Separations and Catalysis
Chapter 41 Membrane Processes for Treatrnent of Industrial Tannery Effluents: A Case Study
Chapter 42 New Developments in Nanofiltration Technology: A Case Study on Recovery of Impurity-Free Sodium Thiocyanate for Acrylic Fiber Industry
Chapter 43 Future Progresses in Membrane Engineering
IndexPermalien de la notice : https://infodoc.agroparistech.fr/index.php?lvl=notice_display&id=68498 Handbook of membrane separations. Chemical, pharmaceutical, food, and biotechnological applications. [texte imprimé] / Anil K. Pabby, Editeur scientifique ; Syed S.H. Rizvi, Editeur scientifique ; Ana Maria Sastre, Editeur scientifique . - Boca Raton : CRC Press, 2009 . - 1164 p.
ISBN : 978-0-8493-9549-9 : 267,54
Bibliographie
Illustrations
Index
Langues : Anglais (eng)
Catégories : Liste Plan de classement
16.5 (SEPARATION-PURIFICATION-EXTRACTION) [Classement Massy]
Thésaurus Agro-alimentaire
SEPARATION ; MEMBRANE ; TRANSFERT DE MASSE ; CHROMATOGRAPHIE ; GAZ ; PERVAPORATION ; CERAMIQUE ; EXTRACTION PAR FLUIDE SUPERCRITIQUE ; ENCRASSEMENT ; ULTRAFILTRATION ; DISTILLATION ; BRASSERIE ; LAITERIE ; TRAITEMENT DES DECHETS INDUSTRIELS ; OSMOSE INVERSE ; BIOREACTEUR ; EXTRACTION PAR SOLVANTType de document : Livre Table des matières : SECTION I Membrane Applications in Chemical and Pharmaceutical Industries and in Conservation of Natural Resources
Chapter 1 Membrane Applications in Chemical and Pharmaceutical Industries and in Conservation of Natural Resources: Introduction
Chapter 2 Application of Membrane Contactors as Mass Transfer Devices
Chapter 3 Membrane Chromatography
Chapter 4 Membranes in Gas Separation
Chapter 5 Pervaporation: Theory, Practice, and Applications in the Chemical and Allied Industries
Chapter 6 Current Status and Prospects for Ceramic Membrane Applications
Chapter 7 Membrane Technologies and Supercritical Fluids: Recent Advances
Chapter 8 Techniques to Enhance Performance of Membrane Processes
Chapter 9 Separation and Removal of Hydrocarbons Using Polymer Membranes
Chapter 10 Zeolite Membranes: Synthesis, Characterization, Important Applications, and Recent Advances
Chapter 11 Membrane Fouling: Recent Strategies and Methodologies for Its Minimization
Chapter 12 Membrane Extraction in Preconcentration, Sampling, and Trace Analysis
Chapter 13 Hybrid Liquid Membrane Processes with Organic Water-Immiscible Carriers (OHLM): Application in Chemical and Biochemical Separations
Chapter 14 Advancements in Membrane Processes for Pharmaceutical Applications
Chapter 15 Membranes in Drug Delivery
Chapter 16 Bio-Responsive Hydrogel Membranes
SECTION Il Membrane Applications in Biotechnology, Food Processing, Life Sciences, and Energy Conversion
Chapter 17 Membrane Applications in Biotechnology, Food Processing, Life Sciences, and Energy Conversion: Introduction
Chapter 18 Ultrafiltration-Based Protein Bioseparation
Chapter 19 Membrane Distillation in Food Processing
Chapter 20 Applications of Membrane Separation in the Brewing Industry
Chapter 21 Developments of Bipolar Membrane Technology in Food and Bio-Industries
Chapter 22 Applications of Membrane Technology in the Dairy Industry
Chapter 23 Microporous Membrane Blood Oxygenators
Chapter 24 Transporting and Separating Molecules Using Tailored Nanotube Membranes
Chapter 25 Use of Emulsion Liquid Membrane Systems in Chemical and Biotechnological Separations
Chapter 26 Membrane Electroporation and Emerging Biomedical Applications
Chapter 27 Proton-Conducting Membranes for Fuel Cells
SECTION III Membrane Applications in Industrial Waste Management (lncluding Nuclear), Environmental Engineering, and Future Trends in Membrane Science
Chapter 28 Membrane Applications in Industrial Waste Management (Including Nuclear), Environmental
Engineering, and Future Trends in Membrane Science: Introduction
Chapter 29 Treatment of Radioactive Effluents: Introduction, Fundamentals, and Scope of Different Membrane Processes
Chapter 30 Radioactive Waste Processing: Advancement in Pressure-Driven Processes and Current World Scenario
Chapter 31 Liquid Membrane-Based Separations of Actinides
Chapter 32 Reverse Osmosis-Based Treatment of Radioactive Liquid Wastes Generated in Hospital Facility and in Steel Industry: Case Studies
Chapter 33 Evaluation of Membrane-Based Processing of Radioactive Nuclear Plant Waste: Case Studies
Chapter 34 Application of Donnan Membrane Process for Recovery of Coagulants from Water Treatment Residuals
Chapter 35 Utilization of Membrane Processes in Treating Various Effluents Generated in Pulp and Paper Industry
Chapter 36 Membrane Bioreactors for Wastewater Treatment
Chapter 37 Membrane-Assisted Solvent Extraction for the Recovery of Metallic Pollutants: Process Modeling and Optimization
Chapter 38 Membrane Contactors for Gaseous Streams Treatments
Chapter 39 Strip Dispersion Technique: Application for Strategic and Precious Metal Separation and Treatment of Wastewater Streams
Chapter 40 Electrically Enhanced Membrane Separations and Catalysis
Chapter 41 Membrane Processes for Treatrnent of Industrial Tannery Effluents: A Case Study
Chapter 42 New Developments in Nanofiltration Technology: A Case Study on Recovery of Impurity-Free Sodium Thiocyanate for Acrylic Fiber Industry
Chapter 43 Future Progresses in Membrane Engineering
IndexPermalien de la notice : https://infodoc.agroparistech.fr/index.php?lvl=notice_display&id=68498 Réservation
Réserver ce documentExemplaires
Localisation Emplacement Section Cote Support Code-barres Disponibilité Massy Bibliothèque OPERATIONS UNITAIRES PAB 16.5 Papier 33004000528698 Empruntable Handbook of membrane separations : chemical, pharmaceutical, food, and biotechnological applications (2015)
Titre : Handbook of membrane separations : chemical, pharmaceutical, food, and biotechnological applications Type de document : texte imprimé Auteurs : Anil K. Pabby, Editeur scientifique ; Syed S.H. Rizvi, Editeur scientifique ; Ana Maria Sastre, Editeur scientifique Mention d'édition : 2e éd. Editeur : Boca Raton : CRC Press Année de publication : 2015 Collection : Chemical Engineering Importance : 1 vol. (XVII-860 p.) Présentation : ill. en noir et en coul., couv. ill. en coul. Format : 29 cm ISBN/ISSN/EAN : 978-1-4665-5556-3 Note générale : Bibliogr. Index Langues : Anglais (eng) Catégories : Thésaurus Agro-alimentaire
BIOREACTEUR ; TRAITEMENT DES DECHETS INDUSTRIELS ; MEMBRANE ; ENCRASSEMENT ; LAITERIE ; CERAMIQUE ; DISTILLATION ; OSMOSE INVERSE ; ULTRAFILTRATION ; PERVAPORATION ; SEPARATION ; EXTRACTION PAR FLUIDE SUPERCRITIQUE ; EXTRACTION PAR SOLVANT ; TRANSFERT DE MASSE ; GAZ ; CHROMATOGRAPHIE ; PETROLE ; INDUSTRIE PHARMACEUTIQUE ; PRODUIT LAITIER ; COMPOSE ORGANIQUE ; METAL ; HUILE VEGETALE ; TRAITEMENT DES EAUX USEES
Liste Plan de classement
16.5 (SEPARATION-PURIFICATION-EXTRACTION) [Classement Massy]Résumé : The Handbook of Membrane Separations: Chemical, Pharmaceutical, Food, and Biotechnological Applications, Second Edition provides detailed information on membrane separation technologies from an international team of experts.
The handbook fills an important gap in the current literature by providing a comprehensive discussion of membrane applications in the chemical, food, pharmaceutical, and biotechnology industries as well as in the treatment of toxic industrial effluents.
This revised second edition has been updated and expanded with discussions of new membrane products and processes and novel applications in engineering, life sciences, and energy conversion.
It also includes new chapters in the field of membrane science and technology covering recent advances in RO and UF, ionic liquids, nanotechnology, roles of membrane in power generation, updates on fuel cells, new membrane extraction configuration, and other important topics.
The handbook is equally suited for the newcomer to the field as it is for process engineers and research scientists (membranologists/membrane experts) who are interested in obtaining more advanced information about specific applications. It provides readers with a comprehensive and well-balanced overview of the present state of membrane science and technology.Type de document : Livre Table des matières : MEMBRANE APPLICATIONS IN CHEMICAL AND PHARMACEUTICAL INDUSTRIES AND IN CONSERVATION OF NATURAL RESOURCES
Membrane Applications in Chemical and Pharmaceutical Industries and in the Conservation of Natural Resources: Introduction
Anil Kumar Pabby, Syed S.H. Rizvi, and Ana Maria Sastre
Advanced Materials in Ultrafiltration and Nanofiltration Membranes
W.J. Lau, Ahmad Fauzi Ismail, Takeshi Matsuura, N.A. Nazri, and E. Yuliwati
Reverse Osmosis Membrane
Dipak Rana, Takeshi Matsuura, Mohd Azraai Kassim, and Ahmad Fauzi Ismail
Industrial Applications of Membrane Contactors
Anil Kumar Pabby, J.V. Sonawane, Ana Maria Sastre, and Y. Kulkarni
Membrane Applications in Oil Refining and Petrochemical Industry
A. Brunetti, G. Barbieri, and Enrico Drioli
Membrane and Monolithic Convective Chromatographic Supports
E. Avramescu, Zandrie Borneman, and M. Wessling
Membranes in Gas Separation
May-Britt Hägg and Liyuan Deng
Pervaporation: Theory, Practice, and Applications in the Chemical and Allied Industries
Vishwas G. Pangarkar and Samit Kumar Ray
Ceramic Membranes Technology: Current Applications and Future Development
Christian Guizard and Adam Stevenson
Techniques to Enhance Performance of Liquid-Phase Membrane Processes by Improved Control of Concentration Polarization
S. Chang and A.G. Fane
Zeolite Membranes: Synthesis, Characterization, Important Applications, and Recent Advances
P. Pina, Manuel Arruebo, and Reyes Mallada
Current Challenges in Reducing Membrane Fouling
Mattheus F.A. Goosen
Membrane Extraction in Preconcentration, Sampling, and Trace Analysis
Jan Åke Jönsson and Estelle Larsson
Advancements in Membrane Processes for Pharmaceutical Applications
Ralf Kuriyel, Masatake Fushijima, and Gary W. Jung
Membranes in Drug Delivery
Simona Maria Fiorentino, Rossella Farra, Barbara Dapas, Bruna Scaggiante, Federica Tonon, Gabriele Grassi, and Mario Grassi
Chitosan and Its Derivatives as Potential Materials for Membrane Technology
Rajesha Kumar and Arun M. Isloor
MEMBRANE APPLICATIONS IN BIOTECHNOLOGY, FOOD PROCESSING, LIFE SCIENCES, AND ENERGY CONVERSION
Membrane Applications in Biotechnology, Food Processing, Life Sciences, and Energy Conversion: Introduction
Anil Kumar Pabby, Ana Maria Sastre, and Syed S.H. Rizvi
Membranes in Power Generation: A Review of Current Uses and Emerging Applications
Dhaval Bhandari, Anthony Y. Ku, and Surinder Singh
Applications of Membrane Technology in the Dairy Industry
P.A. Marcelo and Syed S.H. Rizvi
Transporting and Separating Molecules Using Tailored Nanotube Membranes
Kexin Jiao, Punit Kohli, and Charles R. Martin
Proton-Conducting Membranes for Fuel Cells
Vineet Rao, Norbert Kluy, Wenbo Ju, and Ulrich Stimming
On the Use of Ionic Liquid Technology for the Selective Separation of Organic Compounds and Metal Ions
A.P. de los Ríos, F.J. Hernández-Fernández, L.J. Lozano, C. Godínez, S. Sánchez-Segado, F.J. Alguacil, F. Tomás-Alonso, and S. Galai
A Critical View on Separation Processes by Membrane Technology Applied in Vegetable Oil Refining
Cesar de Morais Coutinho
MEMBRANE APPLICATIONS IN INDUSTRIAL WASTE MANAGEMENT (INCLUDING NUCLEAR), ENVIRONMENTAL ENGINEERING AND FUTURE TRENDS IN MEMBRANE SCIENCE
Membrane Applications in Industrial Waste Management (Including Nuclear), Environmental Engineering and Future Trends in Membrane Science: Introduction
Anil Kumar Pabby and Ana Maria Sastre
Advancement in Membrane Methods for Liquid Radioactive Waste Processing: Current Opportunities, Challenges, and the Global Scenario
Grazyna Zakrzewska-Koltuniewicz
Overview and the Current Status of Membrane-Based Processing of Radioactive Nuclear Plant Waste: Evaluation of Some Case Studies
Anil Kumar Pabby, J.V. Sonawane, S.K. Gupta, S.R. Sawant, N.S. Rathore, and Y. Kulkarni
Polymer Inclusion Membranes
Spas D. Kolev, M. Inês, G.S. Almeida, and Robert W. Cattrall
Membrane Bioreactors for Wastewater Treatment
Eoin Syron and Eoin Casey
Concentration-Driven Membrane Processes for the Recovery of Valuable Compounds from Industrial Wastes
Eugenio Bringas, M. Fresnedo San Román, Ana M. Urtiaga, and Inmaculada Ortiz
Membrane Contactors for the Absorption of Carbon Dioxide from Gaseous Streams: State of the Art on Membrane Improvements
Alessandra Criscuoli and Enrico Drioli
Liquid Membranes for Studies Involving Nuclear Waste Remediation Using Hollow-Fiber Contactors
Seraj A. Ansari, Pankaj Kandwal, and Prasanta K. Mohapatra
Hollow-Fiber Renewal and Strip Dispersion Liquid Membrane Techniques: Application for Metal Separation, Recovery, and Wastewater Treatment
Anil Kumar Pabby, Suman C. Roy, J.V. Sonawane, N.S. Rathore, C.B. Patil, Ana Maria Sastre, and Y. Kulkarni
Future Progress in Membrane Engineering
Enrico Drioli and Gianluca Di ProfioPermalien de la notice : https://infodoc.agroparistech.fr/index.php?lvl=notice_display&id=182079 Handbook of membrane separations : chemical, pharmaceutical, food, and biotechnological applications [texte imprimé] / Anil K. Pabby, Editeur scientifique ; Syed S.H. Rizvi, Editeur scientifique ; Ana Maria Sastre, Editeur scientifique . - 2e éd. . - Boca Raton : CRC Press, 2015 . - 1 vol. (XVII-860 p.) : ill. en noir et en coul., couv. ill. en coul. ; 29 cm. - (Chemical Engineering) .
ISBN : 978-1-4665-5556-3
Bibliogr. Index
Langues : Anglais (eng)
Catégories : Thésaurus Agro-alimentaire
BIOREACTEUR ; TRAITEMENT DES DECHETS INDUSTRIELS ; MEMBRANE ; ENCRASSEMENT ; LAITERIE ; CERAMIQUE ; DISTILLATION ; OSMOSE INVERSE ; ULTRAFILTRATION ; PERVAPORATION ; SEPARATION ; EXTRACTION PAR FLUIDE SUPERCRITIQUE ; EXTRACTION PAR SOLVANT ; TRANSFERT DE MASSE ; GAZ ; CHROMATOGRAPHIE ; PETROLE ; INDUSTRIE PHARMACEUTIQUE ; PRODUIT LAITIER ; COMPOSE ORGANIQUE ; METAL ; HUILE VEGETALE ; TRAITEMENT DES EAUX USEES
Liste Plan de classement
16.5 (SEPARATION-PURIFICATION-EXTRACTION) [Classement Massy]Résumé : The Handbook of Membrane Separations: Chemical, Pharmaceutical, Food, and Biotechnological Applications, Second Edition provides detailed information on membrane separation technologies from an international team of experts.
The handbook fills an important gap in the current literature by providing a comprehensive discussion of membrane applications in the chemical, food, pharmaceutical, and biotechnology industries as well as in the treatment of toxic industrial effluents.
This revised second edition has been updated and expanded with discussions of new membrane products and processes and novel applications in engineering, life sciences, and energy conversion.
It also includes new chapters in the field of membrane science and technology covering recent advances in RO and UF, ionic liquids, nanotechnology, roles of membrane in power generation, updates on fuel cells, new membrane extraction configuration, and other important topics.
The handbook is equally suited for the newcomer to the field as it is for process engineers and research scientists (membranologists/membrane experts) who are interested in obtaining more advanced information about specific applications. It provides readers with a comprehensive and well-balanced overview of the present state of membrane science and technology.Type de document : Livre Table des matières : MEMBRANE APPLICATIONS IN CHEMICAL AND PHARMACEUTICAL INDUSTRIES AND IN CONSERVATION OF NATURAL RESOURCES
Membrane Applications in Chemical and Pharmaceutical Industries and in the Conservation of Natural Resources: Introduction
Anil Kumar Pabby, Syed S.H. Rizvi, and Ana Maria Sastre
Advanced Materials in Ultrafiltration and Nanofiltration Membranes
W.J. Lau, Ahmad Fauzi Ismail, Takeshi Matsuura, N.A. Nazri, and E. Yuliwati
Reverse Osmosis Membrane
Dipak Rana, Takeshi Matsuura, Mohd Azraai Kassim, and Ahmad Fauzi Ismail
Industrial Applications of Membrane Contactors
Anil Kumar Pabby, J.V. Sonawane, Ana Maria Sastre, and Y. Kulkarni
Membrane Applications in Oil Refining and Petrochemical Industry
A. Brunetti, G. Barbieri, and Enrico Drioli
Membrane and Monolithic Convective Chromatographic Supports
E. Avramescu, Zandrie Borneman, and M. Wessling
Membranes in Gas Separation
May-Britt Hägg and Liyuan Deng
Pervaporation: Theory, Practice, and Applications in the Chemical and Allied Industries
Vishwas G. Pangarkar and Samit Kumar Ray
Ceramic Membranes Technology: Current Applications and Future Development
Christian Guizard and Adam Stevenson
Techniques to Enhance Performance of Liquid-Phase Membrane Processes by Improved Control of Concentration Polarization
S. Chang and A.G. Fane
Zeolite Membranes: Synthesis, Characterization, Important Applications, and Recent Advances
P. Pina, Manuel Arruebo, and Reyes Mallada
Current Challenges in Reducing Membrane Fouling
Mattheus F.A. Goosen
Membrane Extraction in Preconcentration, Sampling, and Trace Analysis
Jan Åke Jönsson and Estelle Larsson
Advancements in Membrane Processes for Pharmaceutical Applications
Ralf Kuriyel, Masatake Fushijima, and Gary W. Jung
Membranes in Drug Delivery
Simona Maria Fiorentino, Rossella Farra, Barbara Dapas, Bruna Scaggiante, Federica Tonon, Gabriele Grassi, and Mario Grassi
Chitosan and Its Derivatives as Potential Materials for Membrane Technology
Rajesha Kumar and Arun M. Isloor
MEMBRANE APPLICATIONS IN BIOTECHNOLOGY, FOOD PROCESSING, LIFE SCIENCES, AND ENERGY CONVERSION
Membrane Applications in Biotechnology, Food Processing, Life Sciences, and Energy Conversion: Introduction
Anil Kumar Pabby, Ana Maria Sastre, and Syed S.H. Rizvi
Membranes in Power Generation: A Review of Current Uses and Emerging Applications
Dhaval Bhandari, Anthony Y. Ku, and Surinder Singh
Applications of Membrane Technology in the Dairy Industry
P.A. Marcelo and Syed S.H. Rizvi
Transporting and Separating Molecules Using Tailored Nanotube Membranes
Kexin Jiao, Punit Kohli, and Charles R. Martin
Proton-Conducting Membranes for Fuel Cells
Vineet Rao, Norbert Kluy, Wenbo Ju, and Ulrich Stimming
On the Use of Ionic Liquid Technology for the Selective Separation of Organic Compounds and Metal Ions
A.P. de los Ríos, F.J. Hernández-Fernández, L.J. Lozano, C. Godínez, S. Sánchez-Segado, F.J. Alguacil, F. Tomás-Alonso, and S. Galai
A Critical View on Separation Processes by Membrane Technology Applied in Vegetable Oil Refining
Cesar de Morais Coutinho
MEMBRANE APPLICATIONS IN INDUSTRIAL WASTE MANAGEMENT (INCLUDING NUCLEAR), ENVIRONMENTAL ENGINEERING AND FUTURE TRENDS IN MEMBRANE SCIENCE
Membrane Applications in Industrial Waste Management (Including Nuclear), Environmental Engineering and Future Trends in Membrane Science: Introduction
Anil Kumar Pabby and Ana Maria Sastre
Advancement in Membrane Methods for Liquid Radioactive Waste Processing: Current Opportunities, Challenges, and the Global Scenario
Grazyna Zakrzewska-Koltuniewicz
Overview and the Current Status of Membrane-Based Processing of Radioactive Nuclear Plant Waste: Evaluation of Some Case Studies
Anil Kumar Pabby, J.V. Sonawane, S.K. Gupta, S.R. Sawant, N.S. Rathore, and Y. Kulkarni
Polymer Inclusion Membranes
Spas D. Kolev, M. Inês, G.S. Almeida, and Robert W. Cattrall
Membrane Bioreactors for Wastewater Treatment
Eoin Syron and Eoin Casey
Concentration-Driven Membrane Processes for the Recovery of Valuable Compounds from Industrial Wastes
Eugenio Bringas, M. Fresnedo San Román, Ana M. Urtiaga, and Inmaculada Ortiz
Membrane Contactors for the Absorption of Carbon Dioxide from Gaseous Streams: State of the Art on Membrane Improvements
Alessandra Criscuoli and Enrico Drioli
Liquid Membranes for Studies Involving Nuclear Waste Remediation Using Hollow-Fiber Contactors
Seraj A. Ansari, Pankaj Kandwal, and Prasanta K. Mohapatra
Hollow-Fiber Renewal and Strip Dispersion Liquid Membrane Techniques: Application for Metal Separation, Recovery, and Wastewater Treatment
Anil Kumar Pabby, Suman C. Roy, J.V. Sonawane, N.S. Rathore, C.B. Patil, Ana Maria Sastre, and Y. Kulkarni
Future Progress in Membrane Engineering
Enrico Drioli and Gianluca Di ProfioPermalien de la notice : https://infodoc.agroparistech.fr/index.php?lvl=notice_display&id=182079 Réservation
Réserver ce documentExemplaires
Localisation Emplacement Section Cote Support Code-barres Disponibilité Massy Bibliothèque OPERATIONS UNITAIRES PAB 16.5 Papier 33004000617202 Sorti jusqu'au 31/01/2021 PermalinkProceedings of the 8th european symposium on thermal analysis and calorimetry. ESTAC 8. (25/08/2002 - 29/08/2002, Barcelone, Espagne). (3 Vol.) Vol. 1 : Theory and instrumentation. Inorganic chemistry, ceramics, metallurgy, geoscience. / R. Nomen (2003)
PermalinkProceedings of the 8th european symposium on thermal analysis and calorimetry. ESTAC 8. (25/08/2002 - 29/08/2002, Barcelone, Espagne). (3 Vol.) Vol. 3 : Physical chemistry kinetics and properties of the matter, process safety and environment, workshops. / R. Nomen (2003)
PermalinkSéchage de gel d'alumine : mise en évidence et définition d'un critère de fissuration. / Fabrice Pourcel (07/11/2003)
PermalinkTechnologies critical to a changing world. (6 Vol.) - 5th world congress of chemical engineering (14/07/1996 - 18/07/1996, San Diego, Etats-Unis) Vol. 4 : Advanced materials. Ethylene and polymer processing. Advanced ceramics processing. (1996)
PermalinkPermalinkTraité de chimie appliquée. (10 Vol.) Tome 4 : Technologie minérale. Troisième partie : Les mortiers et les liants. Les produits céramiques. Le verre. Les combinaisons du chrome. Les combinaisons du manganèse. Les couleurs minérales. Les terres rares. La préparation et les applications des substances à grande surface. / K. Winnacker (1965)
Permalink